The SlimeVR Server takes the rotation of each tracker and translates
it into motion data. The server must be running while you are using
your trackers for the full-body tracking to function properly.

Choose your operating system:

After you launch the SlimeVR Server, enter your Wi-Fi name and
Password into the fields provided.
Note: Both Wi-Fi and Password fields are case sensitive and the
trackers will only
work on 2.4gHz networks. Next, use the cable provided to plug each
tracker to your computer so that they can connect to the same
network as your computer.

With the silicone side of the strap facing you, place the plastic ring on
the hook and tighten until comfortable. Pro Tip: The Thigh straps are
the most likely to slip, so be sure to apply a bit more tension to keep
them in place.

In the SlimeVR Server, click on the limb that the tracker is mounted to
and then assign the
correct tracker to that limb. Pro Tip: You can shake your tracker to
make it easier to identify it in
the server You can use the tracker stickers provided to make it easier
to set up for your next VR session!

We strongly recommend that you use the Automatic Mounting
option as it is able to understand the unique orientation of each
tracker based on a series of poses.

To do the automatic mounting, you simply follow the steps guiding
you through the poses on the server. The most difficult to get right is
the ski pose. The optimal form is to squat down, puff out your chest,
pull your elbows back, and stand on your toes while the system is
assessing the stance. It will likely take a few tries to get right.

If you are unable to do this series of movements, you can also kneel
down with your feet pointed back to get the same result without the
need for balancing.

We recommend that you use the pre-set proportions when you
select the Manual Proportions option. The baseline inputs will cover
95% of users and allow you to really dial things in for your unique
body shape over time.

Please note: if you notice that your legs are lifting off the ground
when you bend over, the first step is to recalibrate your play space.
The trackers base all of their measurements off of your headset
height, and will result in abnormal movements if that data feed is
incorrect

We host weekly Calibration Support sessions on VRChat on Sundays
at noon PST for anyone who needs a bit of help working through these
steps. All are welcome to join!

For VRChat on standalone headsets like Quest, Enable the VRChat
OSC Trackers and input the IP Address of your Quest which can be
found under  Settings > Wi-Fi > Select your Wi-Fi > scroll down until
you see your IP Address. For PCVR, you are going to use the Somatic
Trackers to emulate Vive trackers for any games/apps that support
them. Begin by going to the SteamVR panel on the SlimeVR Server
and toggle on each of the trackers that you are using. Make sure
that both the SlimeVR Server and SteamVR are running when you
are using your trackers!

Still have question?
Check out the links below to see a more comprehensive list of
Frequently Asked Questions
or join our growing Discord community and immediately get help
from hundreds of VR Enthusiasts!